Used for fixing door and window frames and similar joinery, filling gaps, insulating electrical installations and hot and cold water pipes, and sealing cavities, holes, and cracks. After 1 to 3 hours of curing, excess material can be trimmed, sanded, and painted. Adheres to all construction materials except silicone, teflon, polyethylene and polypropylene. It is resistant to all kind of weather conditions, seawater, diluted acid and caustic solutions, steam and humidity.
- Shake the can strongly for up to 30 seconds. Install the can to the gun by turning it.
- Remove any dirt, dust and grease from the application surface and moisten it with water. (Moistening the substrate and the applied foam is especially important for accelerating the reaction and achieving efficient results.)
- Use the can upside down.
- Press the trigger of the gun to allow the foam to come out.
- Adjust the foam output speed and volume using the valve at the back of the gun.
- Clean the gun and valve thoroughly after use for future applications.
- Any uncured foam residues should be cleaned with SOMAFIX FOAM &GUN CLEANER.
- Since the applied foam will expand, controlled volume should be used.
| Chemical Basis |
Polyurethane Prepolymer |
| Curing System |
Moisture |
| Skin Forming Time |
8-10 min |
| Cutting Time |
30-45 min |
| Density |
17-20 kg/m3 |
| Thermal Resistance |
-40ºC to +100ºC |
| Yield |
50 lt |
| Thermal Conductivity |
0.0379 W/mK |
| Application Temperature |
0ºC / +35ºC |
| Storage Temperature |
0ºC / +30ºC |
| Ideal Can Temperature |
+20ºC |
| Shelf life |
18 months |